Commit History

Автор SHA1 Съобщение Дата
  bart 2287e54c6b Integrated valid bits into cache block ram. Reset now iteratively clears the entire cache. Allows for much lower FPGA usage and better timings. Should be able to greatly increase cache size as there is an abundance of BRAM. преди 1 година
  bart 2fe0518bb3 Improved interrupt timing/alignment, fixing bug where interrupts are not allowed during the UART bootloader. преди 1 година
  bart 52f2819774 Removed leftover ccache instructions from debugging instability problems. Commented out required ccache instructions for when L1I cache returns in the future. преди 1 година
  bart 9a285550c0 Updated documentation a bit, added newlines to BENCH, removed wrong comments from L2cache.v преди 1 година
  bart 88681ec5d0 New arbiter that further improves performance by removing latency for instruction memory access. Created instability again, which I found to be caused by bad interrupt timings. Fixed by changing the interruptValid wire to use branch_MEM for alignment. I do not know why this fixed all problems as it is very hard to simulate this issue. L1 cache should be possible again! преди 1 година
  bart add43b75da L2 cache at 100MHz now greatly increases performance. Attempted to create l1i and l1d cache, but becomes unstable and the issue is difficult to similate/replicate. Therefore, all l1 cache is now bypassed and the code can be found in l1cacheUnstable.v. As no l1 cache anymore, I removed some ccache statements to increase performance as this instruction currently does nothing. преди 1 година
  bart 5af536210d Fixed instability by adding clear cache instruction during SPI transfer. No idea why this fixed the issue, as the I/O address range is above the limit for cache to work. преди 1 година
  bart 9a6bf3cd52 Improved reset for cache. Disabled l2 cache as it currently reduces performance. Added more CCache instructions to code, although likely not needed. Still instability issues when L1I cache is enabled. преди 1 година
  bart 7e81e7fa17 Added files missing from last commit (L1I cache). преди 1 година
  bart 3253b1bc2c Added L1I cache. Added clear cache instruction, which is now added in the UART bootloader and BDOS program loaders. Fixed too fast read part in SPI flasher. Snake userbdos program now sometimes crashes, which needs further investigation. преди 1 година
  bart dfb3bbb48e Added L1D cache. Currently only works stable when valid bit is set 0 on WRITE. Valid bit 1 after cache miss read works fine for some reason. преди 1 година
  bart b6831c4209 Added L2 cache (no L1 for now) between CPU and SDRAM controller. No noticable performance difference, can likely be optimized further to reduce cache hit latency. преди 1 година
  bart 28bcde6466 New SDRAM controller that uses both SDRAM chips. Now separate bus from MU for better performance, as controller runs at 100MHz. Also updated some debug code as debugging was needed. Tested working in hardware. 2x performance boost in some cases. преди 1 година
  bart 240770cb51 Progress on asm for bcc with new architecture. Started on SDRAM testbench for new controller. преди 1 година
  bart 1a2f5e6c55 Added qws Quartus file. преди 2 години
  bart e1bb01a621 Cleaned and renamed Quartus project. преди 2 години
  bart d602419429 Added support for negative ints in .dw for python assembler. преди 2 години
  bart 7e822dcae0 Made assembly for rendering mandelbrot program, with other improvements as well. преди 2 години
  bart 19b70deac8 Added support for signed .dw instructions. преди 2 години
  Bart cf2db3b9cd Merge pull request #1 from b4rt-dev/PixelEngine преди 2 години
  bart 01b9bb8f29 Added signed right shift operation to CPU, assembler, compiler, code and documentation. преди 2 години
  bart 4dd2ff7765 Merged from main. преди 2 години
  bart 6e3cd7cd9c PixelEngine now works in hardware with both HDMI and NTSC. Added pxtest and mandelbrot test programs. преди 2 години
  bart 7b14d2d273 Improved Pixel Engine. преди 2 години
  bart 6dc8fc396f Added Pixel Engine in simulation. преди 2 години
  bart 442d51ba85 Added images to documentation, HDMI is working without lvds, init of new sdram controller done. преди 2 години
  bart 308cc6a90d Fixed SDRAM controller by setting phase shift to 180 degrees. преди 2 години
  bart a76905443f Ported Quartus to 5CEA5 FPGA. SDRAM does not seem to work. преди 2 години
  b4rt-dev 8d56c91fea Added fast (but inaccurate) and accurate (but slow) option for UART flasher. преди 2 години
  b4rt-dev 118fe8b319 Improved new button check in USB keyboard driver of BDOS преди 2 години