FPGC6/BCC/FPGCbuildTools/asm/lib/fs.c

/*
* Filesystem library
* Handles all filesystem related work for userBDOS programs using CH376.
* Uses only bottom USB port (SPI1 CH376), 
*  allowing top USB top to be used for other USB devices (like HID).
* Uses blocking delays for now.
*/

// uses stdlib.c

#define FS_INTERRUPT_ADDR 0xC0272D

//CH376 Codes
#define FS_CMD_GET_IC_VER           0x01
#define FS_CMD_SET_BAUDRATE         0x02
#define FS_CMD_ENTER_SLEEP          0x03
#define FS_CMD_SET_USB_SPEED        0x04
#define FS_CMD_RESET_ALL            0x05
#define FS_CMD_CHECK_EXIST          0x06
#define FS_CMD_SET_SD0_INT          0x0b
#define FS_CMD_SET_RETRY            0x0b
#define FS_CMD_GET_FILE_SIZE        0x0c
#define FS_CMD_SET_FILE_SIZE        0x0d
#define FS_CMD_SET_USB_ADDRESS      0x13
#define FS_CMD_SET_USB_MODE         0x15
#define FS_MODE_HOST_0              0x05
#define FS_MODE_HOST_1              0x07
#define FS_MODE_HOST_2              0x06
#define FS_CMD_GET_STATUS           0x22
#define FS_CMD_RD_USB_DATA0         0x27
#define FS_CMD_WR_USB_DATA          0x2c
#define FS_CMD_WR_REQ_DATA          0x2d
#define FS_CMD_WR_OFS_DATA          0x2e
#define FS_CMD_SET_FILE_NAME        0x2f
#define FS_CMD_DISK_CONNECT         0x30
#define FS_CMD_DISK_MOUNT           0x31
#define FS_CMD_FILE_OPEN            0x32
#define FS_CMD_FILE_ENUM_GO         0x33
#define FS_CMD_FILE_CREATE          0x34
#define FS_CMD_FILE_ERASE           0x35
#define FS_CMD_FILE_CLOSE           0x36
#define FS_CMD_DIR_INFO_READ        0x37
#define FS_CMD_DIR_INFO_SAVE        0x38
#define FS_CMD_BYTE_LOCATE          0x39
#define FS_CMD_BYTE_READ            0x3a
#define FS_CMD_BYTE_RD_GO           0x3b
#define FS_CMD_BYTE_WRITE           0x3c
#define FS_CMD_BYTE_WR_GO           0x3d
#define FS_CMD_DISK_CAPACITY        0x3e
#define FS_CMD_DISK_QUERY           0x3f
#define FS_CMD_DIR_CREATE           0x40
#define FS_CMD_SET_ADDRESS          0x45
#define FS_CMD_GET_DESCR            0x46
#define FS_CMD_SET_CONFIG           0x49
#define FS_CMD_AUTO_CONFIG          0x4D
#define FS_CMD_ISSUE_TKN_X          0x4E

#define FS_ANSW_RET_SUCCESS         0x51
#define FS_ANSW_USB_INT_SUCCESS     0x14
#define FS_ANSW_USB_INT_CONNECT     0x15
#define FS_ANSW_USB_INT_DISCONNECT  0x16
#define FS_ANSW_USB_INT_USB_READY   0x18
#define FS_ANSW_USB_INT_DISK_READ   0x1d
#define FS_ANSW_USB_INT_DISK_WRITE  0x1e
#define FS_ANSW_RET_ABORT           0x5F
#define FS_ANSW_USB_INT_DISK_ERR    0x1f
#define FS_ANSW_USB_INT_BUF_OVER    0x17
#define FS_ANSW_ERR_OPEN_DIR        0x41
#define FS_ANSW_ERR_MISS_FILE       0x42
#define FS_ANSW_ERR_FOUND_NAME      0x43
#define FS_ANSW_ERR_DISK_DISCON     0x82
#define FS_ANSW_ERR_LARGE_SECTOR    0x84
#define FS_ANSW_ERR_TYPE_ERROR      0x92
#define FS_ANSW_ERR_BPB_ERROR       0xa1
#define FS_ANSW_ERR_DISK_FULL       0xb1
#define FS_ANSW_ERR_FDT_OVER        0xb2
#define FS_ANSW_ERR_FILE_CLOSE      0xb4
#define FS_ERR_LONGFILENAME         0x01
#define FS_ATTR_READ_ONLY           0x01
#define FS_ATTR_HIDDEN              0x02
#define FS_ATTR_SYSTEM              0x04
#define FS_ATTR_VOLUME_ID           0x08
#define FS_ATTR_DIRECTORY           0x10 
#define FS_ATTR_ARCHIVE             0x20

// Sets SPI1_CS low
void FS_spiBeginTransfer()
{
    asm(
        "; backup regs\n"
        "push r1\n"
        "push r2\n"

        "load32 0xC0272C r2          ; r2 = 0xC0272C\n"

        "load 0 r1                          ; r1 = 0 (enable)\n"
        "write 0 r2 r1                      ; write to SPI1_CS\n"

        "; restore regs\n"
        "pop r2\n"
        "pop r1\n"
        );
}

// Sets SPI1_CS high
void FS_spiEndTransfer()
{
    asm(
        "; backup regs\n"
        "push r1\n"
        "push r2\n"

        "load32 0xC0272C r2          ; r2 = 0xC0272C\n"

        "load 1 r1                          ; r1 = 1 (disable)\n"
        "write 0 r2 r1                      ; write to SPI1_CS\n"

        "; restore regs\n"
        "pop r2\n"
        "pop r1\n"
        );
}

// write dataByte and return read value
// write 0x00 for a read
// Writes byte over SPI1 to CH376
word FS_spiTransfer(word dataByte)
{
    word retval = 0;
    asm(
        "load32 0xC0272B r2             ; r2 = 0xC0272B\n"
        "write 0 r2 r4                      ; write r4 over SPI1\n"
        "read 0 r2 r2                       ; read return value\n"
        "write -4 r14 r2                    ; write to stack to return\n"
        );

    return retval;
}




// Get status after waiting for an interrupt
word FS_WaitGetStatus()
{
    word intValue = 1;
    while(intValue)
    {
        word *i = (word *) FS_INTERRUPT_ADDR;
        intValue = *i;
    }
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_GET_STATUS);
    FS_spiEndTransfer(); 
    //delay(1);

    FS_spiBeginTransfer();
    word retval = FS_spiTransfer(0x00);
    FS_spiEndTransfer(); 

    return retval;
}

// Function to send a string (without terminating 0)
void FS_sendString(char* str)
{
    char chr = *str;            // first character of str

    while (chr != 0)            // continue until null value
    {
        FS_spiTransfer(chr);
        str++;                  // go to next character address
        chr = *str;             // get character from address
    }
}


// Function to send data d of size s
void FS_sendData(char* d, word s)
{
    char chr = *d;          // first byte of data

    word i;
    for(i = 0; (unsigned int) i < (unsigned int)s; i++)  // write s bytes
    {
        FS_spiTransfer(chr);
        d++;                    // go to next data address
        chr = *d;           // get data from address
    }
}

// Returns file size of currently opened file (32 bits)
word FS_getFileSize()
{
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_GET_FILE_SIZE);
    FS_spiTransfer(0x68);
    word retval = FS_spiTransfer(0);
    retval = retval + (FS_spiTransfer(0) << 8);
    retval = retval + (FS_spiTransfer(0) << 16);
    retval = retval + (FS_spiTransfer(0) << 24);
    FS_spiEndTransfer();

    return retval;
}


// Sets cursor to position s
// Returns FS_ANSW_USB_INT_SUCCESS on success
word FS_setCursor(word s) 
{
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_BYTE_LOCATE);
    FS_spiTransfer(s);
    FS_spiTransfer(s >> 8);
    FS_spiTransfer(s >> 16);
    FS_spiTransfer(s >> 24);
    FS_spiEndTransfer();

    return FS_WaitGetStatus();
}


// Reads s bytes into buf
// If bytesToWord is true, four bytes will be stored in one address/word
// Can read 65536 bytes per call
// Returns FS_ANSW_USB_INT_SUCCESS on success
// TODO: this surely can be optimized for speed in some way!
word FS_readFile(char* buf, word s, word bytesToWord) 
{
    if (s == 0)
        return FS_ANSW_USB_INT_SUCCESS;

    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_BYTE_READ);
    FS_spiTransfer(s);
    FS_spiTransfer(s >> 8);
    FS_spiEndTransfer();

    word retval = FS_WaitGetStatus();
    // Return on error or EOF
    if (retval == FS_ANSW_USB_INT_SUCCESS) // eof
        return 0;
    if (retval != FS_ANSW_USB_INT_DISK_READ)
        return retval;


    word bytesRead = 0; 
    word wordsRead = 0;
    word doneReading = 0;

    // clear first address
    buf[wordsRead] = 0;

    // used for shifting bytes to word
    word currentByteShift = 24;

    while (doneReading == 0)
    {
        // Read set of bytes (max 255)
        FS_spiBeginTransfer();
        FS_spiTransfer(FS_CMD_RD_USB_DATA0);
        word readLen = FS_spiTransfer(0x00);

        word readByte;

        word i;
        for (i = 0; i < readLen; i++) 
        {
            readByte = FS_spiTransfer(0x00);

            // Read 4 bytes into one word, from left to right
            if (bytesToWord)
            {
                readByte = readByte << currentByteShift;
                buf[wordsRead] = buf[wordsRead] + readByte;


                if (currentByteShift == 0)
                {
                    currentByteShift = 24;
                    wordsRead++;
                    buf[wordsRead] = 0;
                }
                else
                {
                    currentByteShift -= 8;
                }

            }
            else
            {
                buf[bytesRead] = (char)readByte;
                bytesRead = bytesRead + 1;
            }
        }
        FS_spiEndTransfer();

        // requesting another set of data
        FS_spiBeginTransfer();
        FS_spiTransfer(FS_CMD_BYTE_RD_GO);
        FS_spiEndTransfer();

        retval = FS_WaitGetStatus();
        if (retval == FS_ANSW_USB_INT_SUCCESS)
            doneReading = 1;
        else if (retval == FS_ANSW_USB_INT_DISK_READ)
        {
            // read another block
        }
        else
        {
            uprintln("E: Error while reading data");
            return retval;
        }
    }

    return retval;
}


// Writes data d of size s
// Can only write 65536 bytes at a time
// returns FS_ANSW_USB_INT_SUCCESS on success
// TODO: optimize for speed
word FS_writeFile(char* d, word s) 
{
    if (s == 0)
        return FS_ANSW_USB_INT_SUCCESS;

    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_BYTE_WRITE);
    FS_spiTransfer(s);
    FS_spiTransfer(s >> 8);
    FS_spiEndTransfer();

    word retval = FS_WaitGetStatus();
    // Return on error
    if (retval != FS_ANSW_USB_INT_DISK_WRITE)
        return retval;


    word bytesWritten = 0;
    word doneWriting = 0;

    while (doneWriting == 0)
    {
        // Write set of bytes (max 255)
        FS_spiBeginTransfer();
        FS_spiTransfer(FS_CMD_WR_REQ_DATA);
        word wrLen = FS_spiTransfer(0x00);

        FS_sendData(d + bytesWritten, wrLen);
        bytesWritten = bytesWritten + wrLen;
        FS_spiEndTransfer();

        // update file size
        FS_spiBeginTransfer();
        FS_spiTransfer(FS_CMD_BYTE_WR_GO);
        FS_spiEndTransfer();


        retval = FS_WaitGetStatus();
        if (retval == FS_ANSW_USB_INT_SUCCESS)
            doneWriting = 1;
        else if (retval == FS_ANSW_USB_INT_DISK_WRITE)
        {
            // write another block
        }
        else
        {
            uprintln("E: Error while writing data");
            return retval;
        }

    }
    
    return retval;
}


// returns status of opening a file/directory
// Usually the successful status codes are:
//  FS_ANSW_USB_INT_SUCCESS || FS_ANSW_ERR_OPEN_DIR || FS_ANSW_USB_INT_DISK_READ
word FS_open() 
{
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_FILE_OPEN);
    FS_spiEndTransfer();

    return FS_WaitGetStatus();
}




// returns FS_ANSW_USB_INT_SUCCESS on success
word FS_close() 
{  
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_FILE_CLOSE);
    FS_spiTransfer(0x01); //0x01 if update filesize, else 0x00
    FS_spiEndTransfer();

    return FS_WaitGetStatus();
}




// Creates file (recreates if exists)
// New files are 1 byte long
// Have not found a way to set it to 0 bytes, 
// since FS_CMD_SET_FILE_SIZE does not work
// Automatically closes file
// returns FS_ANSW_USB_INT_SUCCESS on success
word FS_createFile() 
{
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_FILE_CREATE);
    FS_spiEndTransfer();

    word retval = FS_WaitGetStatus();
    // Return on error
    if (retval != FS_ANSW_USB_INT_SUCCESS)
        return retval;

    // open and close file
    FS_open();
    FS_close();

    return FS_ANSW_USB_INT_SUCCESS;
}


// Sends single path f
// No processing of f is done, it is directly sent
// This means no error checking on file length!
void FS_sendSinglePath(char* f) 
{

    // send buf
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_SET_FILE_NAME);
    FS_sendString(f);      // send file name
    FS_spiTransfer(0);       // close with null
    FS_spiEndTransfer();
}


// Sends path f
// Can be relative or absolute file or directory
// REQUIRES CAPITAL LETTERS and must conform the 8.3 filename standard
// Function can handle folders with forward slashes
// returns FS_ANSW_USB_INT_SUCCESS on success
word FS_sendFullPath(char* f) 
{
    // path to uppercase and replace backslash by slash
    word i = 0;
    while (f[i] != 0)
    {
        f[i] = toUpper(f[i]);
        if (f[i] == '\\')
            f[i] = '/';
        i++;
    }

    word removedSlash = 0; // to restore removed slash
    // remove (single) trailing slash if exists
    // we reuse i here since it points to the end of the path
    if (i > 1) // ignore the root path
    {
        if (f[i-1] == '/')
        {
            f[i-1] = 0;
            removedSlash = 1;
        }
    }

    // if first char is a /, then we go back to root
    if (f[0] == '/')
    {
        FS_sendSinglePath("/");
        FS_open();
    }

    i = 0;
    char buf[16]; // buffer for single folder/file name
    word bufi = 0;

    while (f[i] != 0)
    {
        // handle all directories
        if (f[i] == 47) // forward slash
        {
            // return error on opening folders containing a single or double dot
            if ((bufi == 1 && buf[0] == '.') || (bufi == 2 && buf[0] == '.' && buf[1] == '.'))
                return FS_ANSW_ERR_OPEN_DIR;

            // add null to end of buf
            buf[bufi] = 0;
            // send buf
            FS_spiBeginTransfer();
            FS_spiTransfer(FS_CMD_SET_FILE_NAME);
            FS_sendString(buf);      // send folder name
            FS_spiTransfer(0);       // close with null
            FS_spiEndTransfer();
            // reset bufi
            bufi = 0;
            // open folder
            word retval = FS_open();
            // Return on if failure / folder not found
            if (retval != FS_ANSW_USB_INT_SUCCESS && retval != FS_ANSW_ERR_OPEN_DIR)
                return retval;
        }
        else
        {
            buf[bufi] = f[i];
            bufi++;
            if (bufi > 13)
                return FS_ERR_LONGFILENAME; // exit if folder/file name is too long
        }
        i++;
    }
    if (removedSlash) // restore removed slash if there
    {
        f[i] = '/';
        f[i+1] = 0;
    }

    // handle filename itself (if any)
    // add null to end of buf
    buf[bufi] = 0;
    if (bufi == 0)
        return FS_ANSW_USB_INT_SUCCESS; // exit if there is no filename after the folder

    // return error on opening folders containing a single or double dot
    if ((bufi == 1 && buf[0] == '.') || (bufi == 2 && buf[0] == '.' && buf[1] == '.'))
        return FS_ANSW_ERR_OPEN_DIR;

    // send buf (last part of string)
    FS_spiBeginTransfer();
    FS_spiTransfer(FS_CMD_SET_FILE_NAME);
    FS_sendString(buf);      // send file name
    FS_spiTransfer(0);       // close with null
    FS_spiEndTransfer();

    return FS_ANSW_USB_INT_SUCCESS;
}