Map.md 6.1 KB
Memory map
The FPGC uses two memory maps to access all different types of memory and I/O. One map is used by the CPU (and implemented by the MU) and the other map is used by the GPU. The GPU memory map is only useful when developing the GPU (in Verilog), so for writing code, you only need to understand the CPU memory map.
CPU memory map
When the CPU gets a READ or WRITE instruction, it will use the following memory map. This means that, for example, reading from address 0xC02740 will read the last PS/2 keyboard scan code, and writing to address 0xC0041F will write an entry in the Palette Table in VRAM32 for the GPU.
$000000 +------------------------+
| |
| SDRAM |
| | $7FFFFF
$800000 +------------------------+
| |
| SPI FLASH |
| | $BFFFFF
$C00000 +------------------------+
| |
| VRAM32 |
| |
| $C00000 |
| Pattern Table |
| $C003FF |
| |
| $C04000 |
| Palette Table |
| $C0041F |
| | $C0041F
$C00420 +------------------------+
| |
| VRAM8 |
| |
| $C00420 |
| BG Pattern Table |
| $C00C1F |
| |
| $C00C20 |
| BG Palette Table |
| $C0141F |
| |
| $C01420 |
| Window Pattern Table |
| $C01C1F |
| |
| $C01C20 |
| Window Palette Table |
| $C0241F |
| $C02420 |
| Parameters |
| $C02421 |
| | $C02421
$C02422 +------------------------+
| |
| SpriteVRAM |
| | $C02521
$C02522 +------------------------+
| |
| ROM |
| | $C02721
$C02722 +------------------------+
| |
| I/O |
| |
| UART0 RX (MAIN)$C02722 |
| UART0 TX (MAIN)$C02723 |
| Unused $C02724 |
| Unused $C02725 |
| UART2 RX (EXT) $C02726 |
| UART2 TX (EXT) $C02727 |
| SPI0 (FLASH) $C02728 |
| SPI0_CS $C02729 |
| SPI0_ENABLE $C0272A |
| SPI1 (CH376_0) $C0272B |
| SPI1_CS $C0272C |
| SPI1_nINT $C0272D |
| SPI2 (CH376_1) $C0272E |
| SPI2_CS $C0272F |
| SPI2_nINT $C02730 |
| SPI3 (W5500) $C02731 |
| SPI3_CS $C02732 |
| SPI3_INT $C02733 |
| SPI4 (EXT) $C02734 |
| SPI4_CS $C02735 |
| SPI4_GP $C02736 |
| GPIO $C02737 |
| GPIO_DIR $C02738 |
| Timer1_val $C02739 |
| Timer1_ctrl $C0273A |
| Timer2_val $C0273B |
| Timer2_ctrl $C0273C |
| Timer3_val $C0273D |
| Timer3_ctrl $C0273E |
| Unused $C0273F |
| PS/2 Keyboard $C02740 |
| BOOT_MODE $C02741 |
| FP_div_writea $C02742 |
| FP_div_divb $C02743 |
| I_div_writea $C02744 |
| I_div_divbs $C02745 |
| I_div_divbu $C02746 |
| I_div_mods $C02747 |
| I_div_modu $C02748 | $C02748
$C02742 +------------------------+
| |
| Nothing |
| | $CFFFFF
$D00000 +------------------------+
| |
| Pixel VRAM |
| |
+------------------------+ $D12C00
GPU memory map
This memory map is only used in the GPU. These are basically the content read from the GPU port of VRAM. This map is only internal to the GPU hardware, and should/can not be used when writing code (use the CPU memory map instead for this!). This map is only useful when making modifications to the GPU in Verilog.
VRAM32
$000 +------------------------+
| |
| Pattern Table |
| | $3FF
$400 +------------------------+
| |
| Palette Table |
| | $41F
+------------------------+
VRAM8
$000 +------------------------+
| |
| BG Tile Table |
| | $7FF
$800 +------------------------+
| |
| BG Color Table |
| | $FFF
$1000 +------------------------+
| |
| Window Tile Table |
| | $17FF
$1800 +------------------------+
| |
| Window Color Table |
| | $1FFF
$2000 +------------------------+
| |
| Parameters |
| | $2001
+------------------------+
SpriteVRAM
$00 +------------------------+
| |
| %0: X pos |
| %1: Y pos |
| %2: Tile |
| %3: Palette+flags |
| | $FF
+------------------------+
PixelVRAM
$000 +------------------------+
| |
| 8-bit color value |
| | $12C00
+------------------------+