1
0

Коммит түүх

Эзэн SHA1 Мессеж Огноо
  bart 2fe0518bb3 Improved interrupt timing/alignment, fixing bug where interrupts are not allowed during the UART bootloader. 1 жил өмнө
  bart 88681ec5d0 New arbiter that further improves performance by removing latency for instruction memory access. Created instability again, which I found to be caused by bad interrupt timings. Fixed by changing the interruptValid wire to use branch_MEM for alignment. I do not know why this fixed all problems as it is very hard to simulate this issue. L1 cache should be possible again! 1 жил өмнө
  bart add43b75da L2 cache at 100MHz now greatly increases performance. Attempted to create l1i and l1d cache, but becomes unstable and the issue is difficult to similate/replicate. Therefore, all l1 cache is now bypassed and the code can be found in l1cacheUnstable.v. As no l1 cache anymore, I removed some ccache statements to increase performance as this instruction currently does nothing. 1 жил өмнө
  bart 9a6bf3cd52 Improved reset for cache. Disabled l2 cache as it currently reduces performance. Added more CCache instructions to code, although likely not needed. Still instability issues when L1I cache is enabled. 1 жил өмнө
  bart 7e81e7fa17 Added files missing from last commit (L1I cache). 1 жил өмнө
  bart dfb3bbb48e Added L1D cache. Currently only works stable when valid bit is set 0 on WRITE. Valid bit 1 after cache miss read works fine for some reason. 1 жил өмнө
  bart 28bcde6466 New SDRAM controller that uses both SDRAM chips. Now separate bus from MU for better performance, as controller runs at 100MHz. Also updated some debug code as debugging was needed. Tested working in hardware. 2x performance boost in some cases. 1 жил өмнө
  bart 9f74a9565f Fixed more MU I/O bugs. Updated everything from BCC except the ASM to work on new CPU. Added back flasher programs. Fixed LOAD/HI bug by using unsigned const16 instead. Updated assembler including hotfix for FPGC jumping to addr3 after UART bootloader is done. FPGC6 now basically fully works again! 2 жил өмнө
  bart 207413dd90 Assembler only needs Int: function, fixed position of program lenght. Ported ROM and UART bootloader over from FPGC5. Updated documentation on interrupts. Added resets. Fixed bug in MU. Increased stack size. Tested everything in hardware. Probably some other fixes and things I forgot. 2 жил өмнө
  bart b74702c915 Created full FPGC6 verilog simulation, added Quartus code from FPGC5 with CPU from FPGC6. Works in hardware, but has combination loop somewhere at the arbiter and the registerbank and stack are not using block ram 2 жил өмнө
  Bart 302c69937e Basic CPU design now done with afaik working hazard detection, forwarding and stalls. Tested in hardware on a EP4CE6 using two SSDisplays and dip switches to view the register content (and see if it matches the simulation). No interrupts yet as this can probably be done at a later stage. 2 жил өмнө
  Bart 9da01544e7 Jump flush now seems to work. Made simple Quartus project to test in hardware and it seems to work fine there as well 2 жил өмнө